In case you missed my guest post over at A Diamond in the Stuff, here it is!
I am super duper hard on sunglasses. They would literally be thrown into my blackhole of a purse, destined to be scratched in the process. When it was time to wear them again it was like looking through a screen door. I got a new pair of sunglasses for a whopping $5 at Wal-mart and I swore to my wonderful husband that I would not wear them until I made a sunglasses case.
There might be tons of tutorials for sunglasses cases out there but I sort of just made this one up in my head. Dangerous, I know.
So here we go, my first ever attempt at a sewing tutorial. Buckles up, it’s gonna be a crazy ride!
I’ve attempted to number things to make them easier. You will need iron on velcro and some batting. I chose 2 different colors of fabric but you could always use the same one.
Cut your fabric and batting to 6 3/4 in. by 7 1/2 in.
(FYI: the fabric pictured above was from round one. Meaning, I cut the fabric entirely to small to hold a pair of sunglasses and thus, had to start completely over. The measurements are from round two.)
Now take your iron on velcro and iron it on leaving enough room for the seam. I’m a fly by the seat of my pants gal, so I eyeballed the placement.
Now it’s time to make a sandwich. No, not a PB&J. A fabric sandwich. Grab piece 3 (batting) and place it on bottom. Grab piece 1 and place it wrong side down on the batting with the velcro at the top. Pretty side facing up, ugly side against the batting. Now take piece 2 and place it right side down onto piece 1 with the velcro at the bottom. Now the pretty side of each piece should be together.
*Important- the velcro should be on opposite ends! One up and one down.
Now pin three sides leaving the velcro top of piece 1 open for turning. You can sew a few inches in on each side on the top, just make sure you have a big enough hole to turn it.
Now clip all of the corners and any excess batting or fabric.
Now it’s time to turn the fabric! Push the batting and right sides of the fabric through the hole.
You will then have a square. (Just imagine this unfolded.) Then take the bottom and make a fold with piece 2 showing. You can now see how the velcro will match up. Pin on the sides. Also be sure to pin along the top where the hole was left open.
Then sew around all sides except for the bottom.
You can see how clean the lines look now that it’s sewed around the edges. You may notice the extra velcro. I had to add some to the outsides because the edges wouldn’t stay down while closed. If you have to add iron on velcro after it’s sewn make sure to use SUPER heat while ironing it on.
Let’s just say, these will be some well protected $5 sunglasses.
The side view.
I sure hope that all of that made sense! This really is an easy beginner sewing project.
Thanks for reading :)
Linking Up To These Parties: Monday- Skip to my Lou Embellishing Life Craft-O-Maniac Its So Very Cheri Making the World Cuter C.R.A.F.T. The Girl Creative Tuesday- Sugar Bee Crafts Topsy Turvy Cakes Night Owl Crafting A Diamond in the Stuff Home Stories A to Z Today's Creative Blog Funky Polkadot Giraffe Wednesday- Trendy Treehouse Fireflies & Jellybeans Saturday MorningsThursday- Somewhat Simple Paisley Passions What Allie's Making Now Christina's AdventuresHouse of Hepworths Friday- Sassy Sites Fingerprints on the Fridge Tatertots and Jello Chic on a Shoestring Decorating Sunday- Under the Table and Dreaming I Heart Nap Time